Member Companies and their Products

FEATURES

The TM-F90Z2 is an automatic powder filling machine,which has both high accuracy and capacity by using an especial tapered auger, and moreover it can be used to fill medicine powder in a sterilized condition.
It is possible to fill powder in a sterilized condition of the isolator, so that the parts that contact powder and the drive parts are sealed off.(CIP/SIP)
It is possible to stabilize the density of the powder in the auger, and keep the accuracy stable longer with the screw feeder.
All parts that contact powder can be removed and assembled, washed, and also sterilized.
Autoclave can be sterilized.
A low-learning curve makes the machine easy to operate and easy to learn.
It can be connected to packing machines or a conveyor.

SPECIFICATIONS and NOTES

Applications: Any kinds of powder (Slight powder/ Infinitesimal Grain/ Granule and Others)
Filling Weight :10 ~ 5000mg
Accuracy : ±0.1%~±10%
Capacity : 10 ~ 100 ps/min
Hopper capacity : 5 L
Container : Vial / Ampoule / Double bag etc.
Material : SUS304 / SUS316L
Air supply : 0.5 MPa 250L(Normal)/ min
Power consumption : 200V 3 phases , 50/60Hz 1.5kW
Weight : About 200 kg (Only the filling machine itself)

*The above specification is different depending on the powder and the filling weight etc.

FEATURES

The TM-F61L7-LV is a automatic powder filling machine , which has both high accuracy and capacity by using an especial tapered auger , and moreover its vacuum deaeration system solves the problems of the mile dust , and accommodation.
It can be used to fill bulky powder compactly by a vacuum deaeration funnel.
The vacuum filter can be removed and assembled , and washed.
It can control the mile dust , keeping the powder level short by the device to control the powder level in bags.
All contact parts can be removed and assembled, and washed.
Disassembly time : about 15 minutes
Assembly time :about 15 minutes
It can keep the accuracy stable by filling and scaling with the hanging device with a built-in load cell.
A low-learning curve makes the machine easy to operate and easy to learn.
It can be connected to packing machines or a conveyor or a bag feeder.

SPECIFICATIONS and NOTES

Applications: Any kinds of powder (Slight powder/ Infinitesimal Grain/ Granule and Others)
Filling Weight :3 ~ 30kg
Accuracy : ±0.1%~±0.5%
Capacity : 2 ~ 4 ps/min
Hopper capacity : 40~200 L
Container : Kraft paper bags(polyester inside) , polyethylene
*Drum , Cardboard etc.
Material : SUS304 / SUS316L
Air supply : 0.5 MPa 500L(Normal)/ min
Power consumption : 200V 3 phases , 50/60Hz 7.0~12.0kW(with a vacuum pump)
Weight : About 500 kg

*The above specification is different depending on the powder and the filling weight etc.

FEATURES

The TM-F31M is a standard automatic powder filling machine which uses a special tapered auger and has both high accuracy and high capacity.
The standard model can be used to process any type of powder.
A touch panel provides easy operation and adjustment.
All contact parts can be removed and assembled , and washed.
Disassembly time : About 10 minutes
Assembly time : About 10 minutes
TM-F31M can fill any type of container(bags , bottles , etc.) ; additionally the machine can be connected to packing machines or a conveyor or a capping machine.
Finally, a load cell device can be installed to improve the accuracy of the machine.
A low-learning curve makes the machine easy to operate and easy to learn.

SPECIFICATIONS and NOTES

Applications: Any kinds of powder (Slight powder/ Infinitesimal Grain/ Granule and Others)
Filling Weight : 10g ~ 3kg
Accuracy : ±0.1%~±1%
Capacity : 2 ~ 60 ps/min
Hopper capacity : 40~200 L
Container : Compatible with any type of container
Material : SUS304 / SUS316L
Air supply : 0.5 MPa 250L(Normal)/ min
Power consumption : 200V 3 phases , 50/60Hz, 3.0~7.5kW
Weight : About 250 kg

*The above specification is different depending on the powder and the filling weight etc.

FEATURES

It is a powder filling machine that limited specification realizes the low cost , and achieved easiness to use.
TM-F11Z0 is compact size (desk-top type)(with movable knob) to carry easily , so that installation location is not chosen.
It is the best to use for multi-product production like a small amount such as investigational new drugs.
A touch panel provides easy operation and adjustment .
1.The setting of each kind can be registered (ten kinds).
2.Servo motor drive
3.Sequencer control
The auger size can be changed to suit the powder.
All contact parts can be removed and assembled , and washed.
Disassembly time : About 10 minutes
Assembly time : About 10 minutes
A low-learning curve makes the machine easy to operate and easy to learn.
Various options
1.Simple glove box 2.Electrostatic removal device 3.Special nozzle : Vials 4.Validation : IQ/OQ
5.The height of the device can change : Trestle change

SPECIFICATIONS and NOTES

Applications: Any kinds of powder (Slight powder/ Infinitesimal Grain/ Granule and Others)
Filling Weight : 10 ~ 5000mg
Accuracy : ±1%~±5%
Capacity : 1 ~ 10 ps/min
Hopper capacity : About 1.5 L
Container : Compatible with any type of container
Material : SUS304 / SUS316L
Power consumption : 100V Single phases , 50/60Hz 0.1kW
It is possible to use it only by inserting it in a domestic general outlet.
Weight : About 25 kg

*The above specification is different depending on the powder and the filling weight etc.